FLAT METAL GASKETS
Flat metal gaskets are deployed wherever the use of other gaskets is not possible due to extreme basic
conditions. Factors that necessitate the use of flat metal gaskets are for example, special temperature- and
pressure values or else a leak rate that renders the deployment of soft material gaskets and metallic soft
material gaskets impossible.
The thickness of the flat metal gaskets differs, depending on the texture of the flange or the conditions of
deployment. Insofar as the surface finish as well as the smoothness of the flanges is particularly good, a
relatively thin flat gasket can be used. The variance for example amounts to 2 to 3 mm in the case of heat
exchangers or 0.5 to 1 mm in the case of spinnerets sticks.
We can offer flat gaskets made of different metals from our assortment that are tailored to your needs.
Apollon InduTec GmbH
Kurt-A.-Körber-Chaussee 73 - Halle J | 21033 Hamburg | Germany
Telefon +49 (0)40 237 67 13 - 10 | Fax +49 (0)40 361 661 53
info@apollon-indutec.de
ENGLISH
DEUTSCH